Total Hardness Test Strips 0 to 425 ppm

Total Hardness Test Strips 0 to 425 ppm

Product Features:
• Easy to use, disposable, and inexpensive
• A great way to obtain quick, quantitative answers in the field or in the lab

Product Description:
Water hardness is caused almost entirely by calcium and magnesium ions. Other di- and trivalent metals have a similar effect, but usually are not present in high enough concentration in potable waters to cause problems. Hardness increases soap consumption in laundries and causes scale in boilers.

Contains 50 tests. 1 vial is 50 strips
Lead Acetate Test Strips for Hydrogen Sulfide Detection

Lead Acetate Test Strips for Hydrogen Sulfide Detection

This is trip can be used on any drinking water but should be of particular interest to anyone using a well or groundwater who has concerns about bacterial contamination.

These test paper do not come with a color chart but the presence and relative concentration of hydrogen sulfide are readily apparent.

While normally specified with a 5ppm detection sensitivity, 1-3ppm appears sufficient to slowly cause the white test paper to turn grey. As the concentration approaches the dangerous level of 400ppm, the change proceeds very rapidly.
Copper Test Strips

Copper Test Strips

This is trip can be used on any drinking water but should be of particular interest to anyone using a well or groundwater who has concerns about bacterial contamination.

These test paper do not come with a color chart but the presence and relative concentration of hydrogen sulfide are readily apparent.

While normally specified with a 5ppm detection sensitivity, 1-3ppm appears sufficient to slowly cause the white test paper to turn grey. As the concentration approaches the dangerous level of 400ppm, the change proceeds very rapidly.
Quaternary (Quats) Ammonium Sanitizer Test Strips 0 - 400 ppm

Quaternary (Quats) Ammonium Sanitizer Test Strips 0 - 400 ppm

Quaternary Sanitizer Test Kit in Single Dispenser Use with Steramine & other Quaternary Sanitizers

Roll Length: 180 inches. Test Range: 0-400 ppm. 1 Roll/Dispenser.

Micro Essential Hydrion QT Test has been calibrated to test the concentration of Alkyl dimethylbenzyl ammonium Compounds under specific test conditions for most accurate results.

The test solution should be pH 7.5 or less.
Color chart shows matches at increments of 0-100-200-300-400 ppm.
Paper roll is contained in a single plastic dispenser with a serrated edge allowing easy tear off of the desired length of paper with a color chart.
Iodine Test Strips for Disinfection​

Iodine Test Strips for Disinfection​

Use iodine test strips for your Disinfection to ensure disinfectant strength is optimized-measures 0, 12.5, 25, 50ppm.

100 strips per vial
Total Iron Test Kit (0 to 5 ppm)

Total Iron Test Kit (0 to 5 ppm)

Kit contains 25 Total Iron Test Strips, 25 Iron Powder Pillow reagents and sample vial.

Tests: Total Iron
Monitor iron levels to help prevent rusting of pool and spa fixtures and plumbing. Test results with just one dip, in just seconds!

For a clean and healthy pool, test the water at each end a minimum of twice a week!

• Easy to use and maintain your pool or spa
• Takes about 15-30 seconds to show results
• A must for a swimming pool or spa owners!
• Test for Total Iron
• 25 Total Iron Test Strips

Range: 0, 0.15, 0.3, 0.6, 1, 2, 5
Nitrate / Nitrite Test Strips

Nitrate / Nitrite Test Strips

Nitrate-nitrite testing strips measure 0-25ppm & 0-500ppm levels respectively & can be used for groundwater testing, well-drinking water quality or bioreactor performance.

Range: Nitrate 0,10,25,50,100,250,500 ppm

50 strips per vial

Note: These strips are extremely sensitive to air & are shipped in a container lined with desiccant. After removing a strip reseal the bottle immediately.
Chlorine Test Strips for Food 0 to 300 PPM

Chlorine Test Strips for Food 0 to 300 PPM

Fast, accurate free (available) chlorine testing in seconds-simply dip & compare to color chart for readings at 25, 50, 100, 200 and 300ppm
Chlorine Test Strips for Food Safety 0 to 1000 PPM

Chlorine Test Strips for Food Safety 0 to 1000 PPM

Use these 0-1000ppm chlorine test strips when you have to meet strict government regulations for food preparation & handling on cruise ships, daycare & seniors homes.

Range: 0, 50, 100, 250, 500, 1000 ppm
Digital 2-in-1 TDS and Conductivity Meter

Digital 2-in-1 TDS and Conductivity Meter

This is a digital TDS meter tester to test the filter water quality purity, to check the performance of your water filter, to check for hardness (1grain=17ppm), to make sure you always drink pure water.

Features:
* Auto-off function: turns off meter after 5 minutes of non-use to conserve batteries

* Automatic temperature compensation and Shift between TDS and Conductivity

Specifications:
Measurement range:
EC: 0-9990 micro-Siemens/cm (us/cm); TDS:0-9990ppm;
Degrees Celsius: 0.1-80.0 Celsius; Fahrenheit: 32.0-176.0,
Accuracy: ±2% , Size: 154mm * 30mm * 14mm, Color: White
Chlorine Test Strip for Potable Water and Swimming Pools

Chlorine Test Strip for Potable Water and Swimming Pools

Monitor water quality contaminants with quick spot tests Convenient, on-site water testing with bright easy-to-read colors

Pop-top vial with desiccant liner protects strips from moisture

25 strips per vial.

Moisture protection, and fast, reliable results make the Insta-TEST an unbeatable system for water quality testing. Simply dip polystyrene strips into water sample, and compare the resulting color pad change to color chart.
Chlorine Test Strips for Disinfection

Chlorine Test Strips for Disinfection

This is the basic chlorine strip you need for preparing and sterilizing rinse water in kitchens.

Foodborne illness caused by bacteria such as Salmonella can be limited by proper cleaning of dishes, countertops, glassware, etc. followed up by rinsing in a bleach solution.

The health code recommends a level of 100-200ppm for effective germ inhibition. Testing should be done a minimum of once a day or more frequently in busy establishments since each freshly rinsed dish or glass will slightly dilute the rinse solution.
10 Parameter Urinalysis Reagent Strips

10 Parameter Urinalysis Reagent Strips

The high-quality Urinalysis Reagent Strip detects protein, glucose, leukocytes, nitrite, urobilinogen, pH, blood, specific gravity, ketone-acetoacetic acid and bilirubin.

Product Features:
* Easy-to-use urinalysis strips: Dip and read-no additional instruments needed!

* Rapid results: Takes from 30 seconds to 2 minutes for results

* High-quality color chart: Quality color charts provide consistent, dependable readings

* Cost effective: Comes with 100 strips per bottle

* Quality long shelf life: Consistent quality in 18 months

For more information, look for Ms. Ann or Ms. Jean
7-in-1 Swimming Pool Test Strips Aqua-Chek

7-in-1 Swimming Pool Test Strips Aqua-Chek

50 Strips/Bottle

Tests for:


Total Hardness
Total Chlorine
Total Bromine
Free Chlorine
pH
Total Alkalinity
Chlorine Stabilizer (Cyanuric Acid)

AquaChek Silver is the most comprehensive test strips providing test results for 7 key parameters in less than one minute! Save time, save money, and service more pools with Fast, Easy, Accurate AquaChek Silver Test Strips!

For more information, look for Ms. Ann or Ms. Jean
Water Hardness Test Strip

Water Hardness Test Strip

Water hardness is measured in ppm or grains per gallon. Our water hardness test strips can measure 0-50-125-250-500ppm or 0-3-7-15-30 grains per gallon.

Excessive water hardness can be a major nuisance and in extreme cases can clog pipes. The appearance of film on glass or in standing water is usually the first sign of a problem.

50 strips per box
 
css.php